This package is ideal for printing and cutting any shape colour label from low cost plain label roll. The labels can be optionally laminated for those extreme durability needs.
The roll printer is the versatile Epson C6500Ae printing full colour at 1200dpi. The printed output is fed via the Accumulator to the Mini finisher. The Mini finisher registers on the printed work and cuts out the labels any shape or size. The maximum width of the roll is 220mm but we need 7mm each size to act as trim edges for waste removal so the maximum width of finished labels is 206mm and the maximum finished length is 254mm.
For smaller labels it's easy to print them two or more across the roll and the mini finisher will slit the finished cut labels into lanes to to make several rolls in one pass.
A matt or clear laminate can be optionally added by the lamination section just prior to cutting.
The system is provide with a free plug in software for Adobe Illustrator as well as Corel Draw.
This adds small 4mm square registration marks around your artwork with a cut line drawn. Hide the cut line and print the artwork with the reg mark to the label roll printer to create printed rolls as work in progress. Hide the artwork and print the cut line to the Mini Finisher with the printed roll loaded and the labels are optionally laminated, cut out to size and shape, waste removed, slit to widths or trimmed at the edges, and wound to finished rolls ready for use. The machines run automatically and hands free allowing the operator to work on other tasks, no manual cutting or hand processing needed.