The NeuraLabel 300xST uses pigment inkjet print technology and is best suited to applications where medium to large numbers of colour labels are required.
With a high print speed you can print hundreds of colour labels in a matter of minutes, while the 8.5" print width means that you can print a large range of label sizes, small to very large like for chemical drums and pallets.. The Neuralabel 300xST utilises separate CYMK pigment ink cartridges which means that the overall ink cost is kept down so the label cost itself is low. The printer uses the proven HP 'page wide' print engine and can be upgrade to include HP on site breakdown fix. The external label roll UNwinder and REwinder are designed to keep the labels accurately aligned. A simple-to-use LCD control panel allows easy access to printer functions. Please note the printer is not Mac compatible.
Please call for advice, samples and package deal
- #PRODUCT DETAILS#The box includes the following items:-
1 NeuraLabel 300XSTcolour label printer
1 Installation software and user manual
1 USB cable
1 UK mains power cable
1 Printhead ready fitted
1 Set CYMK ink cartridges
- #TECHNICAL SPECIFICATION #
||HP "PageWide" single-pass pigment inkjet technology
||2400 x 1200 dpi
||up to 20 inches per second/s
||Individual cyan, magenta, yellow and dual black cartridges.
||Max 216mm, Min 38mm
|Liner / Media Width:
||Max 216mm, Min 38mm
||Fixed position reflective black mark sensor for black marks centre rear
||USB 2.0, Ethernet
||Software is not included see BarTender recommended in our software section
||37.8 lbs (17.1 kgs)
||20.3W x 15.7H x 15D inches
- #ACCESSORIES# The winders are included
- #WARRANTY# This product is supplied with a 12 month return-to-base parts and labour warranty. The customer is responsible for all shipping costs associated with returning the product to KTEC's workshops for repair under warranty. The provision of a loan printer for the period of any repairs is not covered by this warranty. The warranty is not an "on-site" service. On-site service options are available at additional cost please enquire.
- #USER TRAINING#
|Printing your own labels can be a rewarding and enjoyable experience, but only if you know how to use your equipment and software correctly. While most of our products are designed to be user-friendly, there are many techniques and methods that can be used to achieve the various print results that customers require across many industry sectors. Some of these ideas can be difficult to convey over the phone or via e-mail, so KTEC offer a comprehensive range of equipment installation and on-site user training options with all printer products and software. These services are available across the UK, however cost varies depending upon your location. Please enquire at the time of purchase.